The ComGas butane hose kit with clamps is a simple solution for those who need a flexible gas connection to their barbecue, cooker or other compatible domestic equipment. It comes in two lengths, 60 cm and 15o cm, to best suit the space available and the type of installation each user has.
🧱 Construction designed for a functional connection
This kit has been designed with a practical logic in mind: to offer a flexible hose together with its clamps to make the assembly more straightforward when considering a replacement or preparing an installation. The basis of the product is a two-layer flexible hose, manufactured according to UNE 53539 standard, an important point for those who are looking for an article oriented to a specific gas conduction application without complicating with loose components.
🔥 A clear solution for gas pipelines
Its function is very specific: to serve as a flexible element within an installation where butane or propane gas needs to be piped. This makes it a useful accessory for those who are looking for a gas hose with a simple and recognisable technical approach, without unnecessary extras and with a configuration that is easy to understand from the first glance.
🧩 Two formats to best fit each installation
One of the most practical points of this product is that it does not force you to choose a single size for all cases. The 60 cm version is interesting when the connection is close and a more compact solution is required, while the 150 cm version offers more room for manoeuvre when the positioning of the device or the bottle requires more travel. This double option makes the product more adaptable to real-life scenarios, both in outdoor kitchen areas and in auxiliary uses inside the home.
Use and maintenance
General plan valid for both versions: 0.6 m and 1.5 m.
Step-by-step installation
- Check that the kit is suitable for the use you need and choose the appropriate length for your installation.
- Always work with the gas turned off, in a ventilated area, and with no flames or ignition sources nearby.
- Check the overall condition of the hose before installation and do not use it if it is damaged or expired.
- Prepare the 2 included clamps before fitting the hose.
- Place the hose on the connection points provided by the equipment, following the appliance manufacturer’s instructions.
- Secure one clamp at each end until the connection is firm and stable.
- Open the gas slowly and check that the connections are leak-tight.
- If you notice a gas smell, shut off the supply, ventilate the area, and do not operate the equipment.
Recommended maintenance
- Visually inspect the hose and connections before each use.
- Replace the tube if it is damaged or past its expiry date.
- Check that the tube marking remains suitable for LPG.
- Always use the equipment in ventilated areas.
- Respect the product’s stated parameters and avoid use outside the specified range.
- If you have doubts about installation or mandatory inspection, contact an authorised installation company.
In the event of a leak or incident
- Close the valve or regulator.
- Open doors and windows to ventilate.
- Do not smoke or light any flames.
- Do not use switches or devices that could generate a spark.
- If the smell persists, stop using the installation and request technical assistance.
Use and maintenance
General plan valid for both versions: 0.6 m and 1.5 m.
Step-by-step installation
- Check that the kit is suitable for the use you need and choose the appropriate length for your installation.
- Always work with the gas turned off, in a ventilated area, and with no flames or ignition sources nearby.
- Check the overall condition of the hose before installation and do not use it if it is damaged or expired.
- Prepare the 2 included clamps before fitting the hose.
- Place the hose on the connection points provided by the equipment, following the appliance manufacturer’s instructions.
- Secure one clamp at each end until the connection is firm and stable.
- Open the gas slowly and check that the connections are leak-tight.
- If you notice a gas smell, shut off the supply, ventilate the area, and do not operate the equipment.
Recommended maintenance
- Visually inspect the hose and connections before each use.
- Replace the tube if it is damaged or past its expiry date.
- Check that the tube marking remains suitable for LPG.
- Always use the equipment in ventilated areas.
- Respect the product’s stated parameters and avoid use outside the specified range.
- If you have doubts about installation or mandatory inspection, contact an authorised installation company.
In the event of a leak or incident
- Close the valve or regulator.
- Open doors and windows to ventilate.
- Do not smoke or light any flames.
- Do not use switches or devices that could generate a spark.
- If the smell persists, stop using the installation and request technical assistance.
Use and maintenance
General plan valid for both versions: 0.6 m and 1.5 m.
Step-by-step installation
- Check that the kit is suitable for the use you need and choose the appropriate length for your installation.
- Always work with the gas turned off, in a ventilated area, and with no flames or ignition sources nearby.
- Check the overall condition of the hose before installation and do not use it if it is damaged or expired.
- Prepare the 2 included clamps before fitting the hose.
- Place the hose on the connection points provided by the equipment, following the appliance manufacturer’s instructions.
- Secure one clamp at each end until the connection is firm and stable.
- Open the gas slowly and check that the connections are leak-tight.
- If you notice a gas smell, shut off the supply, ventilate the area, and do not operate the equipment.
Recommended maintenance
- Visually inspect the hose and connections before each use.
- Replace the tube if it is damaged or past its expiry date.
- Check that the tube marking remains suitable for LPG.
- Always use the equipment in ventilated areas.
- Respect the product’s stated parameters and avoid use outside the specified range.
- If you have doubts about installation or mandatory inspection, contact an authorised installation company.
In the event of a leak or incident
- Close the valve or regulator.
- Open doors and windows to ventilate.
- Do not smoke or light any flames.
- Do not use switches or devices that could generate a spark.
- If the smell persists, stop using the installation and request technical assistance.
